TCI Precision Metals' Machine-Ready Blanks are pre-machined and ready for final operations. Depending on the tolerances specified, these blanks are precision sawed, then ground or milled. Blanks come flat, square and parallel so you can load, lock and go. SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 15–20%) and nickel (between 2–10. 5%) metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel and is essentially non-magnetic. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes. The composition was developed by W. H. Hatfield at Firth-Vickers in 1924 and was marketed under the trade name “Staybrite 18/8”. It is specified by SAE International as part of its SAE steel grades. Outside of the US it is commonly known as A2 stainless steel, in accordance with ISO 3506 for fasteners. In the commercial cookware industry it is known as 18/8 stainless steel. In the unified numbering system it is UNS S30400. The Japanese equivalent grade of this material is SUS304. It is also specified in European norm 1. 4301. Corrosion resistance 304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 °C. It is considered resistant to pitting corrosion in water with up to about 400 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C. 304 stainless steel is also very sensitive at room temperature to the thiosulfate anions released by the oxidation of pyrite (as encountered in acid mine drainage) and can undergo severe pitting corrosion problems when in close contact with pyrite- or sulfide-rich clay materials exposed to oxidation. For more severe corrosion conditions, when 304 stainless steel is too sensitive to pitting or crevice corrosion by chlorides or general corrosion in acidic applications, it is commonly replaced by 316 stainless steel. Application 304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws, [4] machinery parts, and car headers. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.
